bright@hspc.cc    +86-317-6091369
Cont

Have any Questions?

+86-317-6091369

Nov 01, 2020

Structural steel pipe production process

The steel pipe production process is simple, the production efficiency is high, the cost is low, and the development is rapid. The strength of steel pipes for spiral machinery is generally higher than that of steel pipes (welded pipes) for straight seam machinery.

Narrow blanks produce steel pipes with larger diameters, and the same width blanks can also be used to produce mechanical steel pipes (welded pipes) with different pipe diameters. But compared with the straight seam pipe of the same length, the weld length is increased by 30~, and the production speed is lower.

Large diameter or thick structural steel pipes are generally made directly from steel billets, while small structural steel pipes and thin-wall mechanical steel pipes (welded pipes) only need to be directly welded through steel strips. Then after a simple polishing, drawing is fine

Supplement: The structural steel pipe is welded with strip steel, so its status is not as high as a seamless pipe.

Structural steel pipe process

Raw material uncoiling-leveling-end shearing and welding-looper-forming-welding-inner and outer bead removal-pre-correction-induction heat treatment-sizing and straightening-eddy current testing- Cut off-water pressure inspection-pickling-final inspection (strict control)-packaging-shipment


Send Inquiry