bright@hspc.cc    +86-317-6091369
Cont

Have any Questions?

+86-317-6091369

C350 L0 AS1163 Australia Structure Pipe

C350 L0 AS1163 Australia Structure Pipe

C350 L0 AS1163 Australia Structure Pipe is a kind of straight seam steel pipe.It plays an important role in large-scale pipeline projects, water and gas transmission projects and urban construction.AS1163 is a standard specification that can be applied to cold-formed or hot-formed welded steel pipes and seamless steel pipes. "C350" means the steel has a minimum yield strength of 350 MPa, and "L0" means the steel has been tested at low temperatures and is suitable for construction applications in cold regions.
Send Inquiry

Product Introduction

Product Introduction

C350 L0 AS1163 Australia Structure Pipe is a kind of straight seam steel pipe. According to the production process, the straight seam steel pipe can be divided into high-frequency straight seam steel pipe and submerged arc welded straight seam steel JCOE steel pipe. C350 L0 AS1163 Australia Structure Pipe plays an important role in large-scale pipeline projects, water and gas transmission projects and urban construction.



Advantages

C350 L0 AS1163 Australia Structure Pipe has many strong points. It is fully automated. It is welded under submerged arc, so its heat exchange and protection performance is relatively strong, and the quality of welding is relatively high. Since the arc is buried under the welding flux in automatic submerged arc welding, it can use large current and the welding efficiency is relatively high.


Product Information

We are professional in manufacturing JCOE PIPE

The specification of JCOE PIPE

Product Line

JCOE LSAW steel pipeline

coating pipe

Outer Diameter (OD)

457mm-1422mm (18"-56")

219mm-1620mm

Wall Thickness (W/T)

8mm-50mm

/

Length (L)

5800mm-12300mm

5800mm-12300mm

Material

Q235,Q345,,X42,X46,X52,X56,X60,X65,X70,X80,etc

Corrosion protection type and standard:

1. FBE/2FBE:CAN/CSA Z 245.20. DIN 30671

2.2LPE/3LPE:CAN/CSA Z 245.21. DIN 30670

3.2LPP/3LPP:DIN30678 NFA49711

Standard

API Spec 5L(PSL1,PSL2), ASTM A252, ASTM A672, ISO3183, etc

Annual Output

150,000 tons/year

1200M2/12hours


Different application scenarios have different standard requirements for C350 L0 AS1163 Australian structural pipe. The following analysis is based on different application scenarios:

Building structures: Specific requirements apply to "structural steel hollow section welding," including welding material matching, heat input control, and low-temperature toughness verification.

Bridge structures: Additional requirements apply to welded joint fatigue resistance, and coarse grain size in the heat-affected zone (HAZ) must be controlled.

Low-temperature environments: Primarily referring to applications ≤-10°C, welding materials must meet low-temperature impact tests, and post-weld joint impact energy verification at -40°C is required.

The production of C350 L0 AS1163 Australian structural pipe requires strict adherence to production procedures, as any detail can impact weld quality.


When purchasing C350 L0 AS1163 Australian structural pipe, users are primarily concerned with its suitability, quality, and long-term durability. Key considerations include:

Precisely meet requirements: Ensure the steel pipe's yield strength is ≥350 MPa and its tensile strength is ≥450 MPa. Using lower-grade steel can lead to insufficient structural load-bearing capacity. For low-temperature applications, a -40°C Charpy impact test report is required to prevent brittle fracture at low temperatures.

Avoid purchasing inferior products: C350 L0 AS1163 Australian structural pipe should include certifications such as chemical composition, mechanical properties, heat treatment records, manufacturing process inspection reports, and surface quality reports. Purchasing from a professional manufacturer is recommended for optimal quality assurance.

Long-term durability: Service life is often affected by the operating environment, which is often affected by corrosive environments. For humid, coastal, or industrially polluted environments, ensure the pipe has been treated with anti-corrosion treatment to prevent rust from seawater salinity, which can shorten its service life.


Hot Tags: c350 l0 as1163 australia structure pipe, China, suppliers, manufacturers, factory, wholesale, cheap, discount, structural steel pipe for power plants, Wind Farm Pile System, structural steel pipe for emerging markets, structural steel pipe for permanent structures, seamless lsaw steel pipe, structural steel pipe exporter

Send Inquiry

(0/10)

clearall